: The main tabletop (laminated surface) is attached to the frame. A shelf bracket is typically secured to the underside of the surface using #10-¾” screws. Support & Power Integration :
: Hardware can loosen due to the vibration of moving the workstation; connections should be checked and re-tightened periodically. Assembly Instructions TABLE
: For models with power kits (like the 750 or 1,250 inverters), the unit is mounted and the switch is set to "auto remote" mode.
: Always ensure the table is on a flat, level surface and that casters are locked before use.
: Ensure the battery voltage does not drop below 10.8V to maintain operation. Accessory Installation :
: Post-mounted screen holders or laptop holders are attached to the top laminated shelf using wood screws. Critical Maintenance & Safety
: Must be mounted to the underside of the shelf before the shelf is attached to the mast.
: To avoid warping the frame, tighten all bolts in a sequential, circular pattern rather than fully tightening one at a time.
Nb - Table Assembly (05-25-22).mp4 Now
: The main tabletop (laminated surface) is attached to the frame. A shelf bracket is typically secured to the underside of the surface using #10-¾” screws. Support & Power Integration :
: Hardware can loosen due to the vibration of moving the workstation; connections should be checked and re-tightened periodically. Assembly Instructions TABLE
: For models with power kits (like the 750 or 1,250 inverters), the unit is mounted and the switch is set to "auto remote" mode. NB - Table Assembly (05-25-22).mp4
: Always ensure the table is on a flat, level surface and that casters are locked before use.
: Ensure the battery voltage does not drop below 10.8V to maintain operation. Accessory Installation : : The main tabletop (laminated surface) is attached
: Post-mounted screen holders or laptop holders are attached to the top laminated shelf using wood screws. Critical Maintenance & Safety
: Must be mounted to the underside of the shelf before the shelf is attached to the mast. Assembly Instructions TABLE : For models with power
: To avoid warping the frame, tighten all bolts in a sequential, circular pattern rather than fully tightening one at a time.
