Kk2.jpg 【Essential 2025】

: Place the flight controller (FC) on your frame with the LCD facing the front of the craft and the buttons toward the back.

: Always remove your propellers before connecting a battery for the first time or performing calibrations to avoid accidental injury. 2. Initial Configuration kk2.jpg

: Wait for the ESCs to emit a short beep (full throttle signal), then immediately lower the transmitter throttle to idle. : Place the flight controller (FC) on your

: Use the on-board "PI Editor" to adjust the gain settings if your drone feels shaky or sluggish. Beginners can often start with the default firmware settings provided by DroneTrest. KK2.1 Flight Controller Guide - Guides Initial Configuration : Wait for the ESCs to

: Turn on your transmitter and set the throttle to maximum.

: Hold down Buttons 1 and 4 on the KK2 board and keep them pressed. Power Up : Plug in the drone's battery.