Drirezip -

Drip Eze is a flexible polyethylene tube with (emitters) spaced at regular intervals (typically 30cm) along the inside of the pipe.

: Each emitter generally releases about 2 litres of water per hour (Lph).

: It can be snaked through garden beds or laid out in a grid for dense planting areas like veggie patches. 1. Planning Your Layout Drirezip

: Highly recommended to prevent clogging and protect the line from high-pressure bursts. 3. Installation Steps

: Available in 4mm (for small pots/areas) or 13mm (standard for garden beds). Drip Eze is a flexible polyethylene tube with

: Connect the tube to your main water source or 13mm poly "header" pipe using a tee or elbow fitting.

: Roll out the pipe according to your plan. Use ground staples (pegs) every meter to keep the line in place. Installation Steps : Available in 4mm (for small

: Always use a filter at the tap. If emitters become blocked, you may need to soak the affected section in a mild vinegar solution to dissolve mineral buildup. DIY GUIDE - Pope Irrigation