If your remote (Bluetooth) is not working after the update, you may need to re-pair it or use the front panel buttons to navigate back to the Bluetooth settings. Reconnect to your WiFi network via the menu. Troubleshooting: Stuck on "LOAD"
: Ensure the drive is empty to avoid path errors. If your remote (Bluetooth) is not working after
: Do not turn off the receiver during the update, as this can "brick" the device. Step-by-Step Installation Prepare the File : Do not turn off the receiver during
Locate your file (e.g., Hawks_555_mix_2507.bin ) on the drive. Press to start the process. A progress bar will appear. Wait for it to reach 100% . A progress bar will appear
Copy the file directly to the root directory of your USB drive (not inside a folder). Plug the USB drive into the receiver’s USB port. Press Menu on your remote. Navigate to Settings or System Upgrade . Select USB Upgrade . Execute the Update
: Verify the file is specifically for the Sunplus 2507L chipset.