A_feladat_1_start.pkt -

A detailed write-up for this type of Packet Tracer lab generally follows these steps: 1. Basic Device Configuration

: On routers, enter interface configuration mode (e.g., interface g0/0 ), set the address ( ip address [IP] [Mask] ), and enable it with no shutdown . A_feladat_1_start.pkt

: Manually configure the IPv4 address, Subnet Mask, and Default Gateway in the Desktop > IP Configuration tab. A detailed write-up for this type of Packet

: Set a "Message of the Day" using banner motd #Unauthorized Access Prohibited# . 2. IP Addressing enter interface configuration mode (e.g.

Every router and switch in the topology typically requires these initial settings: