: Attach the I1 panel and secure it using the cam locks.
: Crucial Step: Use the previously attached safety strap to secure the bookcase to the wall to prevent tipping.
: Attach the H1 panel with the unfinished side facing up. Insert two cam locks onto the cam bolts and join the bottom piece using the wooden dowels. Secure the unit with screws, then cover all cam locks and screws with the provided caps. Finishing Touches 0h7uvb2ip0p7trhfmuczk_source.mp4
: Connect the C1 and D1 panels to the A1 panel using the provided screws and caps. Main Structure Assembly
: Attach the G panel with the unfinished side facing up. Secure it with four screws into the pre-drilled holes on the D1 and C1 panels, then insert four cam bolts into the inner pre-drilled holes on the back of the G panel. : Attach the I1 panel and secure it using the cam locks
: Lay the J and K back panels over the unit. Ensure they are evenly aligned before nailing them firmly into place.
(True Black Oak finish). Before you begin, clear a large workspace and verify that all panels and hardware are present as listed in your manual. Insert two cam locks onto the cam bolts
: Carefully stand the bookcase upright. Insert shelf supports at your preferred heights and slide in the shelves with the finished side facing outward.